VERONA COLLECTION
thickness: 1.2-1.4MM
average size: 55 sq. ft.
availability: 6 weeks
minimum order: 300 sq.ft.
Verona is a full aniline leather which has been milled extensively to achieve a naturally pebble grain appearance. The best steer hides have been hand selected and the highest quality dyes and oils have been used in its re-tannage to give Verona a very natural look combined with a soft hand. This leather is hand tipped to give it a very dimensional appearance. If ever there was perfect leather needed, Verona should always come to mind.
SPECIFICATIONS
| performance characteristics | |
| EN ISO 4045 DETERMINE Ph & Ph (DIFFERENCE FIGURE) |
Min 3,2 |
| ISO105/B02 COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP |
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5 |
| EN ISO 15700 COLOR FASTNESS TO WATER SPOTTING |
Grey Scale ≥ 3 (No permanent swelling) |
| ISO 11641 COLOR FASTNESS OF LEATHER TO PERSPIRATION |
80 Cycles ≥ 3.5 |
| EN ISO 11640 COLOR FASTNESS OF LEATHER TO RUBBING |
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5 |
| EN ISO 11644 FINISH ADHESION |
3 N/cm |
| EN ISO 3376 MEASURE TENSILE STRENGTH AND % ELONGATION |
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80% |
| EN ISO 5402 FLEXING ENDURANCE (FLEXOMETER METHOD) |
50,000 Cycles (no finish damage cracks) |
| EN ISO 17233 COLD CRACK RESISTANCE OF FINISH |
-15°C (no finish cracks) |
| EN ISO 3377-1 TEAR STRENGTH (SINGLE EDGE TEAR) |
>20 N Minimum |
| flame resistance | |
| CA TB 117 - 2013 |
Complies |
| NFPA - 260 CIGARETTE IGNITION |
Class 1 |
| FMVSS 302 |
TBA |
prop 65  |
|
