NORMAN COLLECTION
thickness: 0.9-1.1MM
average size: 51 sq. ft
availability: In Stock
minimum order: 1 hide
PERFORMANCE LEATHER
Norman is fine Italian, aniline dyed leather with a soft and supple hand. It is stained with a combination of subtle oils and dyes, followed by a protective topcoat to give it excellent wear ability. The fine graining adds to its beauty and gives it a warm, cozy appeal. Please note, the hides used to make this leather are of South American origin. They will have a large hump hole on the head area as well as multiple brands.
SPECIFICATIONS
performance characteristics | |
EN ISO 4045 DETERMINE Ph & Ph (DIFFERENCE FIGURE) |
Min 3,2 |
ISO105/B02 COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP |
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5 |
EN ISO 15700 COLOR FASTNESS TO WATER SPOTTING |
Grey Scale ≥ 3 (No permanent swelling) |
ISO 11641 COLOR FASTNESS OF LEATHER TO PERSPIRATION |
80 Cycles ≥ 3.5 |
EN ISO 11640 COLOR FASTNESS OF LEATHER TO RUBBING |
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5 |
EN ISO 11644 FINISH ADHESION |
3 N/cm |
EN ISO 3376 MEASURE TENSILE STRENGTH AND % ELONGATION |
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80% |
EN ISO 5402 FLEXING ENDURANCE (FLEXOMETER METHOD) |
50,000 Cycles (no finish damage cracks) |
EN ISO 17233 COLD CRACK RESISTANCE OF FINISH |
-15°C (no finish cracks) |
EN ISO 3377-1 TEAR STRENGTH (SINGLE EDGE TEAR) |
>20 N Minimum |
flame resistance | |
CA TB 117 - 2013 |
Complies |
NFPA - 260 CIGARETTE IGNITION |
Class 1 |
FMVSS 302 |
Complies |
prop 65 |